Products > Compression > A-Lign Compression Fittings
A-Lign Compression Fittings
Materials: CA360, CA345, CA377
Vibration Resistance: Fair
Working Pressure: 400 PSI Maximum based on tubing size ALWAYS consult tubing specifications
Conformance: Meets functional requirements of SAE as indicated by configuration
Applications: Air, oil, water, lubricant and other applications which use brass, copper, aluminum and thermoplastic tubing. Use of thermoplastic tubing requires a brass insert (Fitting Configuration 60AE)
Temperature Range:
-65 to +212°F
-54 to +100°C
Benefit:
- Reduces maintenance costs and assembly time
- Lower costs based on fewer vendors
- Reduces the number of SKU's required to cover needs
|
Feature:
- Sleeve is integrated with nut
- Wide range of sizes and styles
- Standard compression bodies
|
Advantage:
- Faster, more reliable assembly
- One-stop shop for all needs
- Interchangeable between part families
|
How to Order:
- Supplied as two piece assemblies including
body and nut with captive sleeve
- Bodies are same as standard compression
fittings
- Some items available on MTO basis only
|
Assembly Instructions:
- Cut tubing squarely and remove burrs
- Slide nut on tubing, threaded end out
- Tighten until nut bottoms, then one additional turn with
wrench
|
Nomenclature: 968A-8C
- 968A: Fitting Configuration
- 8: Tube Size in sixteenths (8/16 = 1/2)
- C: Pipe Size 3/8"
- Dimensions subject to change without notice
|
DO NOT OVER TIGHTEN OR TUBING MAY SPLIT
|
|
Lead Free Brass Fittings Available